Re: Generic Hanger for 2x4

Дата публикации: 24-10-2026 01:38:08

By the sound of it, you could remove the 40mm leg and fashion a way to hold your separate attachment on the 70mm top face. The Dovetailing in your pic 2, will work, if the attachment has the male portion of the dovetail.  You will still need a way to stop the 2nd piece from over balancing and falling off.The simple example could be a plate with tab and socket, and a possible top down fastener.  Pic taken before Chamfer / fillet treatments.  Another version with fillet for strenght. Might help...

Схожие новости

#	Наименование новости	Тональность	Информативность	Дата публикации
1	Re: Generic Hanger for 2x4	0	3.72	24-10-2026
2	Re: Generic Hanger for 2x4	0	12.14	24-10-2026
3	Re: Generic Hanger for 2x4	0	5.5	24-10-2026
4	Re: Generic Hanger for 2x4	0	20	24-10-2026
5	Re: Generic Hanger for 2x4	0	14.17	24-10-2026
6	Re: How to revolve cut at an angle...?	0	20.54	24-10-2026
7	How to revolve cut at an angle...?	0	6.66	24-10-2026
8	Feature request: Fit-class-driven geometry with nominal, machining-target, and 3D-print modes	0	6.46	24-10-2026
9	Only @ mention the OP ( original poster) in follow up messages	0	3.62	12-05-2026
10	Sheet Metal Auto Mitering with Angle	0	10.13	02-08-2026

Классификация: . Схожих патентов: 0. Схожих новостей: 10. Тональность: 0. Информативность: 11.1. Источник: forums.autodesk.com.