Re: Generic Hanger for 2x4

Дата публикации: 24-10-2026 02:16:03

How strong is strong?  Depends on shape and thickness. Your pic 2 dovetail without a fastener would probably over balance.I have used a countersink screw setup in the pic.  Can be as simple as a shear pin.3d Printing allows for blind holes if that helps. Might help.

Схожие новости

#	Наименование новости	Тональность	Информативность	Дата публикации
1	Re: Generic Hanger for 2x4	0	5.5	24-10-2026
2	Re: Generic Hanger for 2x4	0	11.1	24-10-2026
3	Re: Generic Hanger for 2x4	0	20	24-10-2026
4	Re: Generic Hanger for 2x4	0	3.72	24-10-2026
5	Re: Generic Hanger for 2x4	0	14.17	24-10-2026
6	Re: How to revolve cut at an angle...?	0	20.54	24-10-2026
7	No Threads?	0	5.53	21-09-2026
8	Anyone got / has access to a CNC air bed punch / a simple punch & press able to do15mm holes in 1.5mm stainless flat sheet 400 x 40 x 1.5mm thick ?	0	15.41	12-08-2026
9	7 Simple Steps to Make a Hand Plane Handle	0	5.61	13-02-2026
10	Native hole-coherence check between mated parts in assemblies	0	6	26-06-2026

Классификация: . Схожих патентов: 0. Схожих новостей: 10. Тональность: 0. Информативность: 12.14. Источник: forums.autodesk.com.